Table of Contents
Advertisement
To adjust the handle height
•
Loosen the handle adjustment lever. Move the
handle up or down to an applicable height and
tighten the handle adjustment lever.
To install the floating disc
1. Put the floating disc on a hard flat surface.
2. Put the product on top of the floating disc.
3. Align the center of the blade assembly with the
center of the floating disc.
4. Turn the floating disc until the blades engage in the
brackets on the floating disc.
CAUTION:
floating disc is correctly installed before
you operate the product. An incorrectly
installed floating disc does not give a
smooth result.
To start the product
1. Open the fuel valve.
12
Make sure that the
2. Set the throttle control to idle speed.
3. Set the choke control in the correct position.
a) If the engine is cold, close the choke.
b) If the engine is warm or the ambient temperature
is high, open the choke.
4. Set the engine ON/OFF switch to ON.
5. Pull the starter rope handle slowly until you feel
some resistance. When you feel resistance, pull the
starter rope handle quickly and with force.
1452 - 003 - 30.01.2023
Advertisement
Table of Contents
