Husqvarna CT 36A/A-V Operator's Manual page 3

Note:
There are 4 different combinations of handle
and blade pitch control: T, ADJ-T, ADJ-P and FOLD-
Technical data on page 25 for
ADJ-T. Refer to
information about handle and blade pitch control on your
product.
1. Throttle control
2. Stop button for the engine
3. Blade pitch knob (T models)
4. Handle
5. Lever for handle height adjustment (ADJ models)
®
6. Pro-Shift lever for blade pitch adjustment (P
models)
7. Belt cover
8. Locking knob for the handle (FOLD models)
9. Handle holder
10. Protection ring
11. Blade
12. Type plate (CE)
13. Type plate (North America)
14. Lifting point
15. Engine ON/OFF switch
16. Oil drain hose
17. Oil tank cap and dipstick
18. Starter rope handle
19. Air filter cover
20. Spark plug
21. Muffler
22. Fuel tank
23. Fuel tank cap
24. Operator's manual
Symbols on the product
WARNING! This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use safety helmet, glasses and ear
protection.
1452 - 003 - 30.01.2023
Use safety foot wear.
Use protective gloves.
WARNING! Keep sparks and flames away
from the product. Risk of fire.
Lifting point.
Stop the engine before you fill fuel.
Use clean, filtered fuel.
WARNING! Risk of injury. Be careful
around the drive belt.
WARNING! Hot surface.
WARNING! Keep your hands away from
the blades.
WARNING! Keep your feet away from the
blades.
WARNING! Remove the floating disc
before you lift the product.
WARNING! The exhaust
fumes from the engine
contain carbon monoxide,
an odorless, poisonous
and very dangerous gas.
Do not run the product in-
doors or in closed spaces.
3