Table of Contents
Advertisement
5.1 Initial Cleaning
Step 1
Remove all accessories and remov‐
able shelf supports from the appli‐
ance.
5.2 First connection
The display shows welcome message after the first connection.
You have to set: Language, Display brightness, Buzzer volume, Time of day, Wireless
connection.
5.3 Wireless connection
To connect the appliance you need:
• Wireless network with the Internet connection.
• Mobile device connected to the same wireless network.
Step 1
Download the mobile app My AEG Kitchen and follow the instructions for the next steps.
Step 2
Turn on the appliance.
Step 3
Select: Menu / Settings / Connections.
Step 4
Select: Wi-Fi. Press the knob.
Step 5
Choose wireless network with the Internet connection. The appliance wireless module starts within
90 sec.
Frequency
Protocol
Max Power
5.4 Software licences
The software in this product contains
components that are based on free and open
source software. AEG acknowledges the
contributions of the open software and
robotics communities to the development
project.
To access the source code of these free and
open source software components whose
12
ENGLISH
Step 2
Clean the appliance and the acces‐
sories only with a microfibre cloth,
warm water and a mild detergent.
2.4 GHz WLAN
2412 - 2484 MHz
IEEE 802.11b DSSS/802.11g/n OFDM
EIRP < 20 dBm (100 mW)
license conditions require publishing, and to
see their full copyright information and
applicable license terms, visit: http://
aeg.opensoftwarerepository.com (folder
GTM3).
5.5 Initial preheating
Preheat the empty oven before the first use.
Step 3
Place the accessories and the re‐
movable shelf supports in the appli‐
ance.
Advertisement
Table of Contents
