Setting Up Your Repeater - NEC Dterm DTL-RPT-2 Manual

term
D Cordless DECT
___________________________________________________________________________________
S 4 S
ECTION ETTING UP YOUR
Setting up the repeater involves four basic steps:
1.
2.
3.
4.
These procedures refer to items on the back of the DTL-RPT-2 Repeater:
___________________________________________________________________________________
DTL-RPT-2 Cordless DECT Repeater Guide
R
EPEATER
Install the AC adapter on the repeater unit.
Register the repeater to the base.
Position the repeater at the proper installation site.
Install the repeater in its final location.

Use ONLY the power adapter that came with your repeater. A different power
adapter may cause an electrical hazard or damage the repeater.

You can register up to six repeaters to a base. Repeat these steps as needed.
Figure 2-5 Back View of the DTL-RPT-2 Repeater
Issue 1.0
2 - 5