Troubleshooting; After Running Out Of Fuel; Phenomena That Are Not Failures - Komatsu PC15MRX-1 Operation And Maintenance Manual

OPERATION

TROUBLESHOOTING

AFTER RUNNING OUT OF FUEL

When starting after running out of fuel, fill with fuel and bleed the air from the fuel system before starting.
For details of bleeding the air, see "REPLACE FUEL FILTER ELEMENT (PAGE 4-48)".

PHENOMENA THAT ARE NOT FAILURES

Note that the following phenomena are not failures:
When the arm is pulled in, the speed of movement will drop
momentarily when the arm is more or less vertical.
The arm speed will drop momentarily when the bucket
teeth are more or less horizontal.
When starting or stopping the swing, noise will be emitted from the brake valve.
When going down a steep slope at low speed, a noise will be emitted from the travel motor.
When the variable gauge is set to CLOSE and the blade is
operated, the gauge expands slightly.
When the blade is lowered and the variable gauge is oper-
ated, the blade moves momentarily.
TROUBLESHOOTING
3-77