Table of Contents
Advertisement
FURTHER INFORMATION
About nanoe
TM
The so-called nanoe™ X are particulate ions containing hydroxyl
radicals whose amount is 10 times that of nanoe™.
nanoe™ X are charged water purification particles generated by
applying high voltage to separate water molecules.
nanoe™ X features: high moisture content, small particles, stability.
1. High moisture content (the moisture content is 1000 times the moisture content of
ordinary negative ions)
2. Small particles (about 5 nm - 20 nm in size)
3. Stability (nanoe™ X has a six-fold higher stability than an ordinary ion, with a 10-meter
or longer range of coverage)
4. High OH hydroxyl amount (up to 4,800 billion of OH ions are generated per second)
5. Weak acidity (with weak acidity features close to that of hair and skin)
Note: nanoe
and the nanoe
TM
WIRING DIAGRAM
SPECIFICATIONS
Rated
Voltage
[V]
220
230
240
Value of power consumption, Air volume and noise are measured when the static
pressure is 0 Pa.
Air volume is the central value measured by this company with a range of ±10% tolerance.
Noise is the A weighted sound pressure level, which is the central value measured by this
company, its tolerance range is from +3 dB to -7 dB. The method to measure is as follows:
in an anechoic chamber, measure noise value 1 m away from the front, left and beneath
of the product, then get the average value.
The applicable ambient temperature of this product is in the range of -10 °C ~ 40 °C,
using it out of this range may cause a fault.
This product comply with the IPX2 requirement against the water drop experiment.
The above specification may be changed without prior notice.
8
X
mark are trademarks of Panasonic Corporation.
TM
Rated
Power
Frequency
Consumption
[Hz]
50
50
50
(About nanoe
Air Volume
[m
/h]
[W]
3
4.0
15
4.0
16
4.0
17
X)
TM
Noise
Net weight
[dB]
[kg]
23.5
1.1
25.5
27
Advertisement
Table of Contents
