Handsfree Answerback - Panasonic DBS-576HD Technical Manual

Section 700 - Operation
Feature Description
Login Key for CTAPI
Message and Voice Mail Key
Silent Monitor Key
Call Record Key
Room Monitoring Set Key
Room Monitoring Initiate Key

Handsfree Answerback

Description
Handsfree Answerback allows you to answer an intercom call without lifting the handset.
The System must be programmed for Voice Calling for you to use this feature. You must press 1
during a call to switch from Tone Calling to Voice Calling.
Operation
To answer calls using Handsfree Answerback:
1. When the intercom call arrives, confirm that the MUTE
LED is off.
(If it is lit, press the MUTE key to turn it off.)
2. Speak into the microphone to answer.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Calling Type)
• FF1-0-03: Extension COS (Voice Call Send)
• FF1-0-03: Extension COS (Voice Call Receive)
• FF3: Extension COS
Considerations
• Handsfree Answerback can be used to respond to only voice calls from other extensions - not
tone calls.
576-50-700
Fixed Feature Code
+ (additional digits to program into
key)
* # 90
Note: The following feature keys were added with Version 3.0
76 + (Ext. No. 0-9999)
77 + (Ext. No. 0-9999)
78 + (Ext. No. 0-9999)
#05
#06
Action
DBS 576 (USA) issued September 2001
Chapter 5. Key Telephone Features
Default Flexible
Feature Code
(if not listed, must use
Fixed Feature Code)
(Version 2.5 or higher)
768
775
776
Result
5-53