Conference Calls - Panasonic DBS-576HD Technical Manual

Chapter 7. SLT Features
To use Manual Camp-on:
1. Lift the handset.
2. Dial the extension number.
3. Enter the Camp-On (Call Waiting) code (default = 2).
4. Remain on the line until the called party answers.
To answer a Camp-on (Call Waiting) signal:
1. Replace the handset.
2. Lift the handset again to be connected to the waiting call.
OR....
Hookflash.
Hardware Requirements
• N/A
Related Programming
• FF1-2: Dial Plan
• FF1-0-03: Extension COS
• FF3: Extension COS
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See "To camp a call onto a
busy extension:" on page 266.

Conference Calls

Description
Conference Calls allow you to add another party to an existing conversation. With the standard
system configuration,
Note: The SLT does not support 8-party conference calling.
The system supports the following types of three-party conference calls:
• 3 extensions
• 2 extensions and 1 CO line
• 1 extension and 2 CO lines
7-24
Action
Action
up to 3 parties can be included in a conference call at any time.
DBS 576 (USA) issued September 2001
Section 700 - Operation
Result
Intercom dial tone
Busy tone
• Called party hears alert tone
• Calling party hears ringback tone
Result
• Current call placed on hold
• Connected to waiting call
576-50-700