Offhook Voice Announce - Panasonic DBS-576HD Technical Manual

Section 700 - Operation
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Press the flashing FF key for the CO line of the incoming
call.
Note:
For details about handling multiple calls, see "Call Hold" on page 6-16.
Hardware Requirements
• N/A
Related Programming
• FF3: CO Off-Hook Signal.
Considerations
• The CO call type may be either multiple ring, direct, or camp-on.
• The system does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• the receiving telephone is a 3rd party voice mail.

Offhook Voice Announce

Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can
also transfer a held call to a busy extension after making the announcement using this feature.
Operation
To make an OHVA:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the OHVA feature access code (default = 8).
4. Make your announcement
576-50-700
Action
Action
DBS 576 (USA) issued September 2001
Chapter 6. DSLT Features
Result
Result
Busy signal
6-37