Unloading - Hitachi ZAXIS 250LC-7 Operator's Manual

Unloading

d
WARNING: The rear end of the flatbed where it meets
the ramp is a sudden bump. Take care when traveling
over it.
Drive the machine forward when unloading the machine.
1. Remove stay (1) when the front attachment is installed.
2. When moving the machine from the end of trailer to the
ramp, set the boom end 2m off the bed, slowly drive the
machine to the ramp.
d
WARNING: The top end of the ramp where it meets
the flatbed is a sudden bump. Take care when traveling
over it as the balance may be lost.
3. When descending the ramp, slowly move the machine
forward until the machine base completely leaves the
ramp.
TRANSPORTATION
5-5
15 ° or less
1
M107-06-018
M107-06-014
M1U5-SL1-012