Table of Contents
Advertisement
Do Not Hoist Whole Machine
The machine capable of mounting super long front
attachment. Has very long front, so it easily looses balance
when the whole machine is hoisted. Never attempt to hoist
the whole machine.
Always hoist the machine after removing the super long front
attachment and the counterweight.
1. Remove the front attachment and counterweight by
referring to the Disassembly/Assembly section.
2. Pull the pilot control shut-off lever to the LOCK position.
3. Stop the engine. Remove the key from the key switch.
4. Close and lock all doors and covers.
5. Use wire ropes and support bar of sufficient length so
that they do not come in contact with the machine while
lifting.
Wrap wire ropes and/or support bar with protector as
required to prevent the machine from being damaged.
6. Set a crane in an appropriate position.
7. Thread the wire rope through and under both sides of
the track frames as illustrated. Attach the wire ropes to
the crane.
TRANSPORTATION
5-9
Support
Bar
Center of
Gravity
MDCA-SL1-040
Advertisement
Table of Contents
