Intended Use - Hitachi ZAXIS 250LC-7 Operator's Manual

INTENDED USE

Intended Use
This machine is designed and intended to be used light to moderate excavating and slope finishing with bucket.
Risk assessment related to the specific application and working conditions of the machine may require additional safety
measures such as protective guards, safety glazing, filtration of cabin air, etc. to be installed, enabling the machine to be
operated safely under the specific conditions. Consult your authorized dealer for further information on possibilities to
adapt the machine accordingly.
This machine can be used for lifting applications that are within the lifting capacity of the machine. Use approved lifting
points and lifting devices and follow the instructions provided in this manual.
Local regulations and instructions must be respected when using the machine. Using this machine and its equipment for
operations other than those intended or approved by the manufacturer, are prohibited.
Modifications
No modification affecting the intended use or structural integrity and therefore safety of the machine should be made
without written approval of the manufacturer. Modifications which are not approved include the use of unauthorized
accessories, assemblies, parts or attachments, including but not limiting to those connected with a coupling device.
Any legal or natural person performing unapproved modifications to the machine assumes all liability directly or
indirectly related to the modification.
The manufacturer reserves the right to reject any warranty claim arising from or related to unapproved modifications.
1