Yamaha PW SYSTEM Manual page 29

Speedometer
Battery capacity indicator
Function display
™ Speedometer
The speedometer displays your bicycle speed (in kilome-
ter per hour or mile per hour). To select the km/mile, see
"km/mile setting".
TIP
If your bicycle speed is less than 2.0 km/h or 1.2 MPH, the
speedometer displays "0 km/h" or "0 MPH".
™ Battery capacity indicator
The battery capacity indicator displays an estimate of how
much capacity is left in the Battery Pack.
™ Function display
The function display can display the following functions.
• Odometer
• Trip meter
• Range (Remaining assist distance)
Push the assist mode switch (down) for 1 second or long-
er, the display changes as follows:
Odometer  Trip meter  Range  Odometer
You can reset the data for trip meter.
 Odometer
This displays the total distance (in kilometers or miles) rid-
den while the power was on.
The odometer cannot be reset.
 Trip meter
This displays the total riding distance (in kilometers or
miles) since it was last reset.
When you turn off the power, the data up to that point will
be saved.
To reset the trip meter and begin counting a new total,
press the assist mode switch (up) and assist mode switch
(down) simultaneously for 2 seconds or longer when the
trip meter is displayed.
29