Yamaha PW SYSTEM Manual page 7

Adjustments before use
™ Handlebar
The angle and height of the handlebars are adjusted as follows:
Change the angle and height by opening the handle on the stem, then adjust the handlebar to the
desired position. Lock the setting by pressing the lever down again.
™ Saddle
The saddle height must suit the rider of the bike. The saddle must not be set higher than the
maximum marking on the seat post.
™ Brakes
It is important that you learn how the brakes work. Make sure you can reach the brake lever to the
front brake, which is activated by the left brake lever. Use both brakes moderately for optimum
braking effect.
™ Gearing
The gearing is controlled by using the shifters on the right and left side of the handlebar (on some
models). Remember to stop pedaling, when you shift gears.
NOTICE
• Change gears as you would on a normal bike. By setting off in a lower gear, the chain and
sprocket will last significantly longer than if, for example, you set off in a high gear.
7