Panasonic WJ-MPU955A User Manual page 132

2.
Information given in each log type is as follows.
OPERATOR LOG
DATE: YYYY MMM DD format
DAY: Day of the week
TIME: AM or PM (12 hour format)
SCTL: System controller ID on which the specified operator established an event
OPER: ID of the operator that performed an event
EVENT: Operator's action performed toward a system controller: logon or logoff
performed by an operator; timeout; logoffnop - automatic logoff due to lack of operation;
logoffsys - automatic logoff due to an error, system reboot, etc.
ALARM LOG
DATE: YYYY MMM DD format
DAY: Day of the week
TIME: AM or PM (12 hour format)
ALMID: The ID of the alarm that established the event.
TRIGGER: The alarm source that generated the alarm. The source ID is presented
proceeded by a letter indicating the source. "C" for camera motion, "D" for (digital) I/O
port, or "S" for serial (RS232) port.
ACTION: The status changes that were ocurred on an Alarm (active, reset, etc.).
OPER: The operator ID of the individual who acknowledged the alarm (if the alarm was
manually acknowledged)
Configuration
From the drop-down box, select the log type you wish to
view: Switching, Operator, Alarm, or Video Loss
128