Advertisement
3. Turn the pulley to lock it into position.
4. After the new pulley assembly is in position, tighten the existing bolts to secure the new
pulley assembly.
Note:
pulley to lock into position.
5. Torque the bolts to 21 to 25 ft-lb (29 to 33 N⋅m).
3462-361A
If the pulley does not turn, loosen the bolts to raise the bolt heads and allow the
G431988
Page 3
Pulley assembly
Mower-deck pulley
Locking slots
Bolt heads
5 mm (3/16 inch)
Advertisement
