Advertisement
6. Remove the belt-cover support bracket from the mower deck.
Installing the Pivot Bracket
Parts Required
1
1
3
3
1. Align the metal template to the mower-deck edge and clamp it tightly to the mower deck.
2. Use a center punch to mark the 3 template holes in the mower deck.
3. Remove the metal template and drill 3 pilot holes (1/8 inch) with a sharp drill bit.
4. Drill 3 holes (13/32 inch) into the pilot holes with a sharp drill bit.
G431492
Pivot bracket
Metal template
Bolt (3/8 x 1 inch)
Nut (3/8 inch)
Page 4
Bolt
Belt cover support bracket
Mower deck
3462-361 A
Advertisement
