Table of Contents
Advertisement
Description
3.3 Design
3.3
Design
3.3.1
Regulations
The motors comply with the following regulations acc. to IEC / EN 60034:
Table 3- 2
Feature
Rated and operation characteristics
Degree of protection
Cooling
Type of construction
Noise emission
Temperature monitoring
Vibration severity grades
(1)
The three-phase motors comply with the relevant sections of EN 60034 and EN 60204-1.
Three-phase motors comply with Low-Voltage Directive 2006/95/EC. Standard motors
comply with the UL regulations. "UR" is stamped on the rating plate of these motors.
Low-voltage motors are components designed for installation in machines in accordance
with the Machinery Directive. They must not be commissioned until it has been verified that
the end product complies with this directive (also take into account EN 60204-1).
Note
Make sure that your end product is in compliance with all of the applicable legislation! The
applicable national, local, and system-specific regulations and requirements must be taken
into account.
3.3.2
Types of construction
The motor is available in the following basic types of construction as well as other optional
types of construction with further potential applications.
Table 3- 3
Shaft height
1PH813□
Two lifting eyebolts, which can be screwed onto the motor in accordance with its type of
construction, are supplied with the motor for transportation purposes.
20
Regulations that have been applied
(1)
(1)
The degree of protection and type of construction of the motor are stamped on its rating plate.
Types of construction
Standard
IEC / EN 60034-1
IEC / EN 60034-5
IEC / EN 60034-6
IEC / EN 60034-7
IEC / EN 60034-9
IEC / EN 60034-11
IEC / EN 60034-14
Standard type of construction
IM B3
IM B5
IM B35
Rotated type of construction
IM V5, IM V6
IM V1, IM V3
IM V15, IM V36
Synchronous/induction motors 1PH813
Operating Instructions, 04/2009, 610.48000.22
Advertisement
Table of Contents
