Table of Contents
Advertisement
Additional functions
Stop & Go
The set power level is reduced to 1
when the Stop & Go function is
activated.
The power levels and timer settings
cannot be changed; the wok can only
be switched off. The minute minder,
switch-off, booster and AutoBoost
times continue to run.
If the function is deactivated, the
appliance switches back to the power
level that was set last.
If the function is not deactivated within
1 hour, the wok will switch off.
Activating/Deactivating
Touch the sensor control.
32
Recall
If the SmartLine element is accidentally
switched off during use, you can use
this function to restore all the settings.
The SmartLine element must be
switched on again within 10 seconds.
Switch the SmartLine element on
again.
The previously set power levels flash.
Press one of the flashing power level
indicators immediately.
The appliance will continue to operate
using the settings selected previously.
Advertisement
Table of Contents
