Before Use; How To Use - Panasonic MJ-CB100 Operating Instructions Manual

Clean all detachable parts before using the appliance for the first time or when you have not used it for a while, and then
assemble them securely. (P. EN6 "How to Use" and P. EN7 "After Use" )
● Ingredients that are not recommended:
Soft fruits that produce puree and can clog the spinner – e.g. bananas, peaches, apricots etc.
Low juice ingredients which can block the product – e.g. fresh basil leaf for etc.
● Please remove hard seeds and stones from fruit before juicing such as guava etc. Hard seeds that are difficult to remove from such as
pomegranate is prohibited for juicing.
● During initial usage, the appliances might have some unpleasant smell (slight burn smell) but this condition is normal.
● Some ingredients may produce a lot of pulps accumulate to the container cover that cause operation stop. (Overload and Overheating
Protection: refer to page EN5)
● Make sure all parts are correctly mounted before you switch on the appliance.
● Please use the juice cup with the cup cover to avoid juice splashing. Make sure to align the juice jug opening to the spout when juicing.
● Speed 2 is suitable for hard type fruits e.g. apples, carrots etc. while speed 1 is suitable for softer type fruits e.g. watermelons.
1
① Release the clamps. ② Lift up the food pusher and
③ Detach the pulp container.
1
2
3
5
Top View
① Plug in and switch on.
② Insert the ingredients one by one
③ Align the food pusher into the
EN6
OI9 JZ50T167_TH_Booklet.indb 6 OI9 JZ50T167_TH_Booklet.indb 6

Before Use

Handling Precautions
To Disassemble
(Hold on the
pusher cover and
twist the pusher
anticlockwise to
remove it.)
container cover.

How to Use

Turn the container upside down
and assemble the spout. Place
the container unit onto the
motor housing.
● Make sure the spout and the clamps are
positioned the same as illustrated.
● Make sure the container unit sits properly on
the motor housing.
Push the clamps as shown until
a locking sound is heard.
● If the clamps are not clamped correctly,
the motor will not operate.
and push them slowly into the
feeding tube using the food pusher.
feeding tube as illustrated.
2
3
①
Lift up the container unit. L ift up the spinner.
②
R emove the spinner pad by turning the
spinner upside down.
③
T urn the container unit upside down and
remove the spout from the container.
2
① Place the spinner in the container
② Place the container cover onto the
③ Attach the pulp container and make
4
● Make sure the spout is in the downward
6
● While removing the juice cup, ensure
● Ensure the spinner is fully stopped
● Some pulp might be hard to collect
unit and fix it into position.
container unit.
sure it is fully aligned with the body.
Place the juice cup as shown.
position when juicing.
After use, switch off and unplug.
the spout is pulled up to prevent juice
from dripping.
before release the clamps.
in the pulp container and stick on the
container cover depending on the
ingredients and amount.
2023/1/6 21:38:11 2023/1/6 21:38:11