Before Use; How To Use - Panasonic MJ-CB600 Operating Instructions Manual

Clean all detachable parts before using the appliance for the first time or when you have not used it for a while, and then
assemble them securely. (P. EN6 "How to Use" and P. EN7 "After Use" )
● Ingredients that are not recommended:
Soft fruits that produce puree and can clog the spinner – e.g. bananas, peaches, apricots etc.
Low juice ingredients which can block the product – e.g. fresh basil leaf for etc.
● Please remove hard seeds and stones from fruit before juicing such as guava etc. Hard seeds that are difficult to remove from such as
pomegranate is prohibited for juicing.
● During initial usage, the appliances might have some unpleasant smell (slight burn smell) but this condition is normal.
● Some ingredients may produce a lot of pulps accumulate to the container cover that cause operation stop.( Overload and Overheating
Protection: refer to page EN5)
● Make sure all parts are correctly mounted before you switch on the appliance.
● Please use the juice cup with the cup cover to avoid juice splashing. Make sure to align the juice jug opening to the spout when juicing.
● Speed 2 is suitable for hard type fruits e.g. apples, carrots etc. while speed 1 is suitable for softer type fruits e.g. watermelons.
1
① Release the ② Lift up the food pusher and
clamps. container cover.
③ Detach the pulp container.
Top View
EN6
OI5 JZ50M166_ML_Booklet.indb 6 OI5 JZ50M166_ML_Booklet.indb 6

Before Use

Handling Precautions
To Disassemble
2
(Hold on the
pusher cover
and twist
the pusher
anticlockwise to
remove it.)
Lift up the container unit.

How to Use

1
Turn the container upside down
and assemble the spout. Place
the container unit onto the
motor housing.
● Make sure the spout and the clamps are
positioned the same as illustrated.
● Make sure the container unit sits properly
on the motor housing.
3
Push the clamps as shown
until a locking sound is heard.
● If the clamps are not clamped
correctly, the motor will not operate.
5
① Plug in and switch on.
② Insert the ingredients one by
one and push them slowly into
the feeding tube using the food
pusher.
③ Align the food pusher into the
feeding tube as illustrated.
3
①
L ift up the spinner.
②
R emove the spinner pad by turning the
spinner upside down.
③
T urn the container unit upside down and
remove the spout from the container.
2
① Place the spinner in the container
unit and fix it into position.
② Place the container cover onto the
container unit.
③ Attach the pulp container and make
sure it is fully aligned with the body.
4
Place the juice cup as shown.
● Make sure the spout is in the
downward position when juicing.
6
After use, switch off and unplug.
● While removing the juice cup, ensure
the spout is pulled up to prevent juice
from dripping.
● Ensure the spinner is fully stopped
before release the clamps.
● Some pulp might be hard to collect
in the pulp container and stick on the
container cover depending on the
ingredients and amount.
2023/1/6 21:05:53 2023/1/6 21:05:53