Section 2 Getting Started; Loading The Battery; Charge Your Battery - Toshiba CAMILEO B10 User Manual

Loading the Battery

Before using the camera, you must load the supplied Lithium-ion rechargeable
battery.
1. Insert the battery according to the correct polarity marks ( + or -).
2. Close the battery cover firmly.
Note
Please remove the insulator on battery connection before use.

Charge your battery

You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF. The
blinking light confirms the camcorder is currently charging, and the light becomes constant after the
charging is completed. In AC charging Mode, the full charge time is about 3.5 to 4.5 hours and the light
will turn itself off automatically after 3~5 minutes when the charging is completed. (Actual charging time
may vary. It depends on the battery conditions.)
Getting Started
10
Section 2
REMOVE
EN