Getting Started - Toshiba CAMILEO H30 Quick Start Manual

GMAA00219011.book Page 4 Friday, March 26, 2010 11:23 AM
4

Getting Started

Getting Started
The battery comes pre-installed in the camcorder, however you must
remove the protective film on the battery before use.
1 Slide the safety latch to the unlocked position and open the battery
cover.
2 Insert the battery according to the correct polarity marks (+ or -).
Remove the protective film on the battery connection before use.
3 Close the battery cover firmly.
Inserting an SD™ Card (optional)
The camcorder comes with an internal memory which allows you to store
pictures and movies. You can expand the memory capacity by using an
optional SD™/SDHC memory card.
To insert the SD™ card (optional):
1 Slide the safety latch to the unlocked position and open the battery
cover.
2 Insert the SD™ Card into the slot until it locks in place.
3 Once inserted, close the battery cover firmly.
Li-ion battery
To remove the SD™ Card, press
the card inward to release it.
When the card pops out, grasp
it and pull it straight out.