Table of Contents
Advertisement
16.2 Device with WLAN home
network (Wi-Fi) without
Connect the WPS function
If your router does not have a WPS
function, you can manually connect
the device to the WLAN home network
(Wi-Fi). The device briefly sets up its
own WLAN network. You can connect
a mobile device to the WiFi network
and transfer the network information
from the WiFi home network (WiFi) to
your device.
Pre-condition: The Home Connect
The app is open and you are signed
in.
on Remote start
1.
customers push.
a The display shows Aut.
Set the program to position 2.
2.
a The display shows SAP.
on Start / reload
3.
a Flashes in the display
a The device sets up its own
WLAN network with the network
knamen (SSID) HomeConnect ".
Call up WLAN settings in the
4th
mobile device.
at least 3 seconds
to press.
.
Connect the mobile device to
the HomeConnect WiFi network
and enter the HomeConnect
WiFi password (key).
a Your mobile device connects
yourself with the device. The
connection process can take up to
60 seconds.
Open the Home Connect app on
5.
the mobile device and follow the
steps in the app.
Enter the network name (SSID) and
6th
password (key) of your home
network in the Home Connect app.
The steps in the
7th
Follow the Home Connect app
to connect the device.
a When the display con shows and
lights up continuously, the device
is connected to the home network.
When the display Err shows, the
8th.
device is not connected to the
home network.
Check whether the device is
-
within range of the home
network.
Reconnect the device to the
-
WLAN home network (Wi-Fi) with
WPS function.
Connect the device to the Home
9.
Connect app → Page 48.
Home Connect
de
47
Advertisement
Table of Contents
