Epson ELPDC30 User Manual page 44

On-Screen Menu Table
Setup Item
Output Resolution
USB Streaming Format
Flickerless
HDMI Link
Sleep Mode
Sleep Mode Timer
Mic. Volume
Information
Reset
* Default setting at time of purchase
Sets the output resolution when connecting an HDMI cable to the HDMI port. You can select the maximum resolution of your
output device from the following options. The highest one is the maximum resolution that the document camera can support.
3840×2160 @ 60
3840×2160 @ 30
1920×1080
1280×720
1024×768
This menu is not available when connected via Miracast.
You can enable H.264 so that H.264 can be selected as the streaming format when connecting via USB.
H.264 On: Enables H.264.
H.264 Off: Disables H.264.
Eliminates flicker when giving presentations in regions with different electrical systems.
50Hz
60Hz
When an image device that supports the HDMI CEC standard is connected to the document camera, operations for the
document camera and the image device can be linked together.
*
When this is set to On , the connected device turns on when the document camera is turned on. A change to this setting takes
effect after the document camera is turned off.
Operation settings when the document camera is inactive.
On: The power automatically turns off if the document camera is inactive for a certain amount of time.
Off: The power remains on even if the document camera is inactive for a certain amount of time.
Sets the amount of time, in the range of 1 to 6 hours, before the document camera automatically turns off.
The volume of the built-in microphone can be manually adjusted.
To increase the volume, select + and hold down the [Enter] button. To decrease the volume, select − and hold down the [Enter]
button.
Displays the product name, firmware version, and MAC address of the document camera.
Resets the menu settings to factory defaults.
Explanation
44