Epson DC-30 Quick Start page 3

Wireless Product Safety Instructions
Contains wireless dongle model: PW00U
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance. Changes
or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. This equipment should be installed
and operated with a distance of at least 7.9 inches (20 cm) between the radiator and
your body. This equipment is restricted to indoor operation only. Do not use the wireless
communication function near automatically controlled devices such as automatic doors
or fire alarms. The electromagnetic waves may cause electromagnetic interference with
equipment or cause the equipment to malfunction.
U.S. FCC Notices
Contains FCC ID: 2AHDGPW00U
Operating frequency range: 2.402-2.480GHz (Bluetooth
5.180-5.240GHz, 5.260-5.320GHz, 5.500-5.700GHz, 5.745-5.825GHz (11a/n/ac)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Properly shielded and grounded cables and connectors must be used for
connection to host computers and/or peripherals in order to meet FCC emission limits.
Data transmission is always initiated by software, which is then passed down through the
MAC, through the digital and analog baseband, and finally to the RF chip. Several special
packets are initiated by the MAC. These are the only ways the digital baseband portion will
turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the
transmitter will be on only while one of the aforementioned packets is being transmitted.
In other words, this device automatically discontinues transmission in case of either
absence of information to transmit or operational failure.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment
should be installed and operated with a distance of at least 7.9 inches (20 cm) between the
radiator and your body.
Innovation, Science and Economic Development Canada (ISED)
Notices
Contains IC (ISED ID): 21367-PW00U
Operating frequency range: 2.402-2.480GHz (Bluetooth), 2.412-2.462GHz (11b/g/n),
5.180-5.240GHz, 5.260-5.320GHz, 5.500-5.700GHz, 5.745-5.825GHz (11a/n/ac)
CAN ICES-3 (B)/NMB-3 (B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject
to the following two conditions: (1) This device may not cause interference. (2) This device
must accept any interference, including interference that may cause undesired operation
of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
This equipment should be installed and operated with a distance of at least 7.9 inches
(20 cm) between the radiator and your body.
Epson America, Inc. Limited Warranty
A. What Is Covered: Epson America, Inc. ("Epson") warrants to the purchaser of the Epson
product enclosed with this limited warranty statement that the product, if purchased
and operated in the United States, Canada, or Puerto Rico, will be free from defects
in workmanship and materials for a period of two (2) year from the date of original
purchase.
B. What Epson Will Do To Correct Problems: If your product requires service during the
limited warranty period, please call Epson at the number at the end of this statement
and be prepared to provide the model, serial number, and date of original purchase.
This line will be answered during Epson's regular support hours (currently 7:00 a.m. to
4:00 p.m., Pacific Time, Monday through Friday—subject to change without notice). If
Epson confirms warranty service is required, Epson will, at its option, repair or replace
the defective unit without charge for parts or labor.
If Epson authorizes an exchange for the defective unit, Epson will ship a replacement
product to you, freight prepaid, as long as you use an address in the United States,
Canada, or Puerto Rico. The replacement product may be new or refurbished to the
Epson standard of quality. (The replacement product may not include promotional
materials, accessories, documentation, manuals, software, or cables.) You are
responsible for securely packing the defective unit and returning it to Epson within five
(5) working days of receipt of the replacement. Epson requires a debit or credit card
number to secure the cost of the replacement product if you fail to return the defective
one.
® ), 2.412-2.462GHz (11b/g/n),
If Epson authorizes repair instead of exchange, Epson will direct you to send your
product to Epson or its authorized service center, where the product will be repaired
and sent back to you. You are responsible for packing the product and for all postage
and shipping costs to and from the Epson authorized service center. When warranty
service involves the exchange of the product or of a part, the item replaced becomes
Epson property. If service cannot be provided on the product for any reason during the
term of this agreement and Epson no longer sells the same model, Epson will replace
the product with a model of equal or superior value. Epson's liability for replacement
of the covered product will not exceed the original retail selling price of the covered
product. Replacement products or parts assume the remaining warranty period of the
product covered by this limited warranty.
C. What This Warranty Does Not Cover
1. Any damage caused by misuse, abuse, improper installation, or neglect; disasters
such as fire, flood, or lightning; or improper electrical currents, software, or
interaction with non-Epson products.
2. Any damage caused by or any service for third-party software, applications, parts,
components, or peripheral devices added to the product after its shipment from
Epson, such as dealer- or user-added boards, components, or cables.
3. Any damage caused by installing the product next to a heat source or directly in the
path of an air vent or an air conditioner.
4. Damage due to excessive, continual usage.
5. Damage caused by failure to properly maintain the product (see your User's Guide
for details).
6. Service when the product is used outside the United States, Canada, or Puerto Rico.
7. Service if the product label, logo, rating label, or serial number has been removed.
8. Consumables such as filters or any items that are identified as being replaceable by
the user in the product documentation (see your User's Guide for details).
9. Loss of data.
10. Installation or removal.
11. Any damage from service performed by anyone other than an Epson-authorized
servicer.
12. Damage resulting from operation or storage in areas with smoke, oil, high humidity,
steam, corrosive gases or chemicals, excessive dust, vibration, or shock.
13. Cosmetic damage caused by handling or normal wear and tear during use.
14. Any product or parts purchased as used, refurbished, or reconditioned.
15. Any damage caused by using improper packaging materials or improper packing
and shipping when returning a product for repair or replacement. You will be
invoiced for such shipping damage to the product.
If a claimed defect cannot be identified or reproduced in service, you will be held
responsible for costs incurred. Epson is not responsible for your data or applications,
which cannot be restored and should be backed up by you. Postage, insurance, or
shipping costs incurred in presenting your Epson product for carry-in warranty service
are your responsibility. This warranty is not transferable.
D. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND
CLASS ARBITRATIONS
1. Disputes: The terms of this Section D shall apply to all Disputes between you and
Epson. The term "Dispute" is meant to have the broadest meaning permissible
under law or in equity and includes any dispute, claim, controversy, or action
between you and Epson arising out of or relating to this Agreement (including its
formation, performance, or breach), the Software, Epson Hardware, the parties'
relationship with each other, and/or any other transaction involving you and Epson,
whether in contract, or with respect to warranty, misrepresentation, fraud, tort,
intentional tort, statute, regulation, ordinance, or any other legal or equitable basis.
However, a "Dispute" does not include a claim or cause of action for (a) trademark
infringement or dilution, (b) patent infringement, (c) copyright infringement or
misuse, or (d) trade secret misappropriation (an "IP Claim"). You and Epson also
agree, notwithstanding Section D, that a court, not an arbitrator, may decide if a
claim or cause of action is for an IP Claim.
2. Initial Dispute Resolution: Before submitting a claim for arbitration in accordance
with this Section D, you and Epson agree to try, for 60 days, to resolve any Dispute
informally. If Epson and you do not reach an agreement to resolve the Dispute
within the 60 days, you or Epson may commence an arbitration in accordance
with Section D(6). Notice to Epson must be addressed to: Epson America, Inc.,
ATTN: Legal Department, 3131 Katella Ave., Los Alamitos, CA 90720. Any notice of
the Dispute shall include the sender's name, address and contact information, the
facts giving rise to the Dispute, and the relief requested. Any notice sent to you will
be sent to the most recent address Epson has in its records for you. For this reason,
it is important to notify us if your address changes by emailing us at
EAILegal@ea.epson.com or writing us at the address above. You and Epson agree
to act in good faith to resolve the Dispute before commencing arbitration in
accordance with this Section D(2).
3. Binding Arbitration: If we do not reach an agreed upon solution within a period of
60 days from the time informal dispute resolution is pursued pursuant to Section
D(2) above, then either party may initiate binding arbitration. You and Epson
agree that all Disputes shall be resolved by binding arbitration according to this
Agreement. ARBITRATION MEANS THAT YOU WAIVE YOUR RIGHT TO A JUDGE OR
JURY IN A COURT PROCEEDING AND YOUR RIGHT TO DISCOVERY AND GROUNDS
FOR APPEAL ARE MORE LIMITED THAN IN COURT. Pursuant to this Agreement,
binding arbitration shall be administered by JAMS, a nationally recognized
arbitration provider, pursuant to the JAMS Streamlined Arbitration Rules and
Procedures or its applicable code of procedures then in effect for consumer related
disputes, but excluding any rules that permit class arbitration (for more detail on
procedure, see Section D(6) below). You and Epson understand and agree that
(a) the Federal Arbitration Act (9 U.S.C. §§ 1 et seq.) governs the interpretation
and enforcement of this Section D, (b) this Agreement memorializes a transaction
in interstate commerce, and (c) this Section D shall survive termination of this
Agreement.
4. Exception—Small Claims Court: Notwithstanding the parties' agreement to resolve
disputes through arbitration, you or we may bring an individual action in the
small claims court of your state or municipality if the action is within that court's
jurisdiction and is pending only in that court.