Table of Contents
Advertisement
STOP
Group
Related Commands
Syntax
Arguments
Examples
*TRG
Group
Related Commands
Syntax
Arguments
Examples
VX4792 User Manual
The STOP command terminates waveform output. When the mode is not set to
continuous, it also resets the sequence pointer to output the waveform from the
top of the sequence with next trigger event.
MODE
RUNNing?, STARt, *TRG
STOP
STOP
None
:STOP
stops the output of a waveform.
The *TRG common command generates a trigger event. This command is
equivalent to the STARt command.
MODE
RUNNing?, STARt, STOP
*TRG
*TRG
None
*TRG
generates a trigger event.
Command Descriptions
3-73
Advertisement
Chapters
Table of Contents
