Command Groups; Commands Grouped By Function; Table 3-4: Function Groups In The Command Set - Sony Tektronix VX4792 User Manual

Command Groups

Commands Grouped by Function

VX4792 User Manual
The Command Groups section divides the organization of the waveform
generator command set into functional groups. (See Command Descriptions
beginning on page 3–21 for a complete description of each command in
alphabetical order.)
A command quick reference (page 3–14) that summarizes the commands
available for the VX4792 Arbitrary Waveform Generator has been provided for
your convenience. We encourage you to duplicate the command quick reference
for easy access to the complete list of commands.
Throughout this section, the parenthesized question symbol (?) follows the
command header to indicate that both a command and query form are included
for the command.
Table 3–4 lists the nine functional groups into which the commands are
classified.

Table 3-4: Function Groups in the Command Set

Group
Calibration and Diagnostic
Memory
Mode
Output
Setup
Status and Event
Synchronization
System
Waveform
Functions Controlled
Control calibration and self test diagnostics according to
selected routines
Control internal memory operations
Control operating mode and set trigger parameters
Turn output waveform on and off and select the sync
signal position
Select clock source and its parameters
Set and query the registers and queues of the reporting
system
Control operation complete and pending command
execution
Control miscellaneous instrument functions such as data
and time, local lockout, query response forms, and
instrument ID
Control transfer of waveforms
3-13