Advertisement
1.
Unscrew the screws on mounting angle 2, and then remove mounting angle 2;
2.
Unscrew the screws on cabling rack 3, and then remove cabling rack 3 from mounting angle 2;
3.
Unscrew the screws on front panel 4, and then remove front panel 4;
4.
Unscrew the screws on front panel 5, and then remove front panel 5;
5.
Unscrew the screws on blank panel 6, and then remove blank panel 6;
6.
Unscrew the screws on power supply module 7, and then remove power supply module 7;
7.
Unscrew the screws on blank panel 8, and then remove blank panel 8;
8.
Unscrew the screws on blank panel 9, and then remove blank panel 9;
9.
Unscrew the screws on fan module 10, and then remove fan module 10;
10. Remove film 11;
11. Unscrew the screws on rear cover plate 11, and then remove rear cover plate 11;
12. Unscrew the screws on protection cover 12, and then remove protection cover 12;
13. Unscrew the screws on protection box 13, and then remove protection box 13;
14. Unscrew the screws on rear cover plate 14, and then remove rear cover plate 14;
15. Unscrew the screws on PCB 15, and then remove PCB 15;
16. Remove all of the labels;
17. Remove all of shielding fingers.
3.1.2 Guidance of treatments to module 4:
1.
Unscrew the screws on PCB 4-2, and then remove PCB 4-2;
2.
Remove shielding finger 4-3 from front panel 4-1;
3.
Remove conductive foam 4-4 from front panel 4-1;
EL-MF877-00
Template Revision B
Figure 2 Rear of HP 7502
Figure 3 Treatments to module 4
Page 3
Advertisement
