HP 7502 Product End-Of-Life Disassembly Instructions page 6

1. Remove the three fans 10-2 from fan frame 10-1;
2. Remove plug 10-3 from fan frame 10-1;
3. Remove the four wire mounts 10-4 from fan frame 10-1;
4. Unscrew the screws on PCB 10-5, and then remove PCB 10-5;
5. Remove shielding finger 10-6 from fan frame 10-1;
6. Unscrew the screws on handle 10-7, and then remove handle 10-7;
7. Remove film 10-8 from fan frame 10-1.
3.2 Material of the facility built
Facility Components
1
2
3
4
4-1
4-2
5
5-1
5-2
6
6-1
7
EL-MF877-00
Template Revision B
Figure 8 Treatments to fan module 10
Material Weight
(g)
Fe 10411
Fe 278
ABS 22
AL 767
Complex PWB 519
Fe 1487
Complex PWB 1000
Fe 303
Complex 2600
PWB+Fe
Weight Selective treatment for
percentage materials and components
50.46%
1.34%
0.10%
3.71%
2.51% The surface of PCB is
greater than 10
square centimeters
7.20%
4.84% The surface of PCB is
greater than 10
square centimeters
1.46%
12.6% 1. Containing
brominated flame
retardants ;
2. The surface of
PCB is greater
than 10 square
centimeters;
3. Electrolyte
Details
Fe recycling
Fe recycling
Pla recycling
Al recycling
Fe recycling
Fe recycling
Fe recycling
Page 6