Specifications; Attachments - Toro Dingo 323 Operator's Manual

3. Remove the hood; refer to Removing the Hood,
page 22.
4. Connect a charger to the battery (Fig. 3) and charge it
for a minimum of 1 hour at 6 to 10 amps.
4
2
Figure 3
1. Positive Battery Post
2. Negative Battery Post
Warning
Charging the battery produces gasses that can
explode.
Never smoke near the battery and keep sparks
and flames away from it.
5. When the battery is fully charged, unplug the charger
from the electrical outlet, then disconnect the charger
leads from the battery posts (Fig. 3).
3
1
m-4970
3. Red (+) Charger Lead
4. Black (–) Charger Lead
10

Specifications

Overall width
Overall length
Overall height
Weight (without attachment)
Rated operating capacity (with
200 lb. operator and std.
bucket)
Tipping capacity (with 200 lb.
operator and st. bucket)
Wheelbase
Dump height (with std. bucket)
Reach—fully raised (with std.
bucket)
Height to hinge pin (std bucket
in highest position)
Engine
Specifications and design are subject to change without
notice.

Attachments

Many attachments are available for use with the traction
unit. These attachments allow you to perform many
different functions with the traction unit such as hauling
materials, digging holes, grading, and more. Contact your
Toro dealer for a list of all approved attachments and
accessories.
Important Use only Toro approved attachments.
40.5 in. (103 cm)
60.0 in. (152 cm)
49.0 in. (125 cm)
1567 lb. (711 kg)
515 lb. (234 kg)
l030 lb. (467 kg)
28 in. (71 cm)
47 in. (120 cm)
26.0 in. (66 cm)
66.0 in. (168 cm)
Kohler Command Pro,
674 cc, V-Twin