Replacing The Processor Fan; Procedure; Post-Requisites - Dell D19M Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the screw holes on the processor fan with the screw holes on the heat sink.
2. Replace the four screws (M6xL10) that secure the processor fan to the heat sink.
3. Connect the processor-fan cable to the system board.
4. Rotate the side-chassis towards the computer until it snaps into place.
Post-requisites
Replace the computer cover.
56

Replacing the processor fan

Replacing the processor fan
computer. After working inside your computer, follow the instructions in
35
After