Siemens SIMATIC NET RUGGEDCOM RX1510 Installation Manual page 31

Device Management
3.3 Accessing the CompactFlash Card
Inserting the CF card
To insert the CF card into the device, do the following:
NOTICE
The device should only be powered on when the CF card is present.
1. Make sure the device is powered down.
2. Remove the CF card access panel.
3. Insert the CF card into the slot until it is fully seated.
Figure 3.3
4. Secure the CF card access panel to the chassis.
Removing the CF card
To remove the CF card from the device, do the following:
1. Make sure the device is powered down.
22
All manuals and user guides at all-guides.com
1
2
3
CompactFlash Card
1
Access Panel
2
Inserting the CF Card
RUGGEDCOM RX1510
Installation Manual, 04/2021, C79000-G8976-1055-20