Opening the Rear Access
Cover
1. Unscrew the 2 hand knobs securing the rear access
cover to the machine (Figure 29).
1. Hand knobs
2. Tilt the rear access cover down and remove to access
the internal components (Figure 29).
Closing the Rear Access Cover
1. Move the rear access cover in place over the back of the
traction unit making sure the tabs line up in the slots.
2. Push the access cover forward, lining up the hand knob
screws with the threaded holes in the machine.
3. Screw the hand knobs tight to secure the rear access
cover in place.
Figure 29
Removing the Side Screens
1. Open the hood.
2. Slide the side screens (Figure 30) up and out of the
slots in the front screen and frame.
1. Side screen
Installing the Side Screens
Slide the side screens into place in the slots in the front screen
and frame.
28
Figure 30