Fujitsu PalmSecure SDK V02 Installation Manual page 19

Note 2) The Sensor driver requires 3MB or more memory.
3MB is required for each Sensor (2 Sensors require 6MB) when
connecting multiple Sensors.
For information on multiple Sensor connection, refer to the "System
>See>
Development Guide" and "Authentication Library Reference Guide".
Note 3) Minimum required space for the Sensor driver.
3MB is required for each Sensor (2 Sensors require 6MB) when
connecting multiple Sensors.
For information on multiple Sensor connection, refer to the "System
>See>
Development Guide" and "Authentication Library Reference Guide".
Note 4) Operations of the Sensor driver are confirmed in the following
environments.
Windows XP
Windows Vista : Ultimate
Windows 7
Please verify the operations yourself if your environment is other than
the above.
Operations have not been tested in virtual environments (such as XP
mode in Windows 7). Please verify the operations yourself if you are
using this product in a virtual environment.
Note 5) The downloaded Sensor driver is compressed. Extract them using
an extract tool.
USB driver
★Tip
The USB driver is included in the OS as part of the operating system.
1.2 Hardware and Software Requirements
: Professional
: Professional
9