Table of Contents
Advertisement
Chapter6 Installing the Sensor Driver for Extended Function (Linux Version)
Add the following lines to the start-up script (ex. /etc/rc.d/rc.local)
Step9
as necessary.
<When connecting one Senor>
<When connecting more than one Sensor> (e.g. 2 Sensors)
>See>
Step10 Connect the Sensor to the target hardware.
>See>
The Sensor is automatically detected.
mkdir -p /dev/usb
mknod -m 666 /dev/usb/fjveincam0 c 180 160
mkdir -p /dev/usb
mknod -m 666 /dev/usb/fjveincam0 c 180 160
mknod -m 666 /dev/usb/fjveincam1 c 180 161
For information on multiple Sensor connections, refer to
the "System Development Guide" and "Authentication Library
Reference Guide".
For information on how to connect the sensor, refer to the
"Sensor Instruction Manual" or "Mouse Type Sensor
Instruction Manual".
56
Hide quick links:
Advertisement
Table of Contents
