Fujitsu PalmSecure SDK V02 Installation Manual page 22

Chapter1 Preliminary Steps before Installing the Sensor Driver
Sensor Driver for Extended Function (Linux Version)
◆
Hardware and Software
Requirements
CPU
Memory
(Note 1)
USB
Hardware
HDD space
Requirement
(Note 2)
Sensor
OS (Note 3)
Software
Requirement
Sensor driver
(Note 4)
Note 1) The Sensor driver requires 3MB or more memory.
3MB is required for each Sensor (2 Sensors require 6MB) when
connecting multiple Sensors.
>See>
Note 2) Minimum required space for the Sensor driver.
3MB is required for each Sensor (2 Sensors require 6MB) when
connecting multiple Sensors.
>See>
Note 3) Operations of the Sensor driver are confirmed in the following
environments.
Linux : CentOS 6.4 [kernel: 2.6.32-358.el6.i686, glibc: 2.12]
Please verify the operations yourself if your environment is other than
the above.
Operations have not been tested in virtual environments.
Please verify the operations yourself if you are using this product
in a virtual environment.
★Tip
Intel® Core™ 2 Duo 2.40GHz or more
(must also comply with the recommended value for the given OS )
1GB or more
(must also comply with the recommended value for the given OS)
USB 2.0 only
3 MB or more
・PalmSecure Sensor
・PalmSecure Sensor V2
For information on the firmware version level on the Sensor
unit, refer to the "System Development Guide".
・Linux (x86)
(kernel 2.6.32 or later)
Contact the sales representatives for the availability.
For information on multiple Sensor connection, refer to the "System
Development Guide" and "Authentication Library Reference Guide".
For information on multiple Sensor connection, refer to the "System
Development Guide" and "Authentication Library Reference Guide".
USB driver
The USB driver is included in the OS as part of the operating system.
Description
12