Get Started; Charge The Battery; Pair The Earpieces With Your - Philips TAA7306 User Manual

3 Get started

Charge the battery

Note
 Before you use your earpieces for the rst
time, place the earpiecess in the charging
case and charge the battery for 3 hours for
optimum battery capacity and lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging the earpieces,
as connecting the earpieces for charging will
power the earpieces o .
Charging case
Connect one end of the USB cable into
the charging case, and another end into
the power source.
The charging case starts charging.
• Charging process is veri ed by the
white LED light next to the USB
socket on the case.
• When the charging case is fully
charged, the light goes o .
Tip
 The charging case serves as a portable backup
battery for charging the earpieces. When the
charging case is fully charged, it supports 3 full
recharge cycle for the earpieces.
Earpieces
Place the earpieces in the charging case.
The earpieces start charging.
• Charging process is veri ed by white
LED light on the earpiecess.
• When the earpieces is fully charged,
the white light goes o .
Tip
 Normally, a full charge takes 2 hours (for the
earpieces or charging case).
Pair the earpieces with
your Bluetooth device at
the rst time
Auto Power on: Open the charging
capsule, the earpiecess discharged
and the blue LED indicator ash
with "power on" voice prompt.
Manual Power on: On both earpiecess
press and hold the multi-function
buttons for approxinmately 2 seconds.
02"
The LED on both earpiecess ashes
in blue for 3 times, and then it
ashes in white.
Both earpiecess are now power on
and are paired with each other.
1 second