Mechanical Safety - Huawei ESS-240V12-9AhBPVBA04 Quick Manual

ESS-240V12-(9AhBPVBA04, 7AhBPVBA04) Battery
Pack
Quick Guide
●
●
●
●
●
●
●

1.5 Mechanical Safety

General Requirements
●
●
Issue 02 (2022-06-30)
Do not expose the equipment to flammable or explosive gas or smoke. Do
not perform any operation on the equipment in such environments.
Do not install, use, or operate outdoor equipment and cables (including but
not limited to moving equipment, operating equipment and cables, inserting
connectors to or removing connectors from signal ports connected to outdoor
facilities, working at heights, and performing outdoor installation) in harsh
weather conditions such as lightning, rain, snow, and level 6 or stronger wind.
If any liquid is detected inside the equipment, disconnect the power supply
immediately and contact the administrator.
To prevent fire due to high temperature, ensure that the ventilation vents or
heat dissipation system are not blocked when the equipment is running.
The equipment room should have good heat insulation, and the walls and
floor should be protected against moisture.
Install a rat guard at the door of the equipment room.
After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for an extended period of time.
Before installation, ensure that the equipment is firmly anchored to the floor
or other solid objects, such as a wall or an installation rack.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
9