Huawei ESS-240V12-9AhBPVBA04 Quick Manual page 31

ESS-240V12-(9AhBPVBA04, 7AhBPVBA04) Battery
Pack
Quick Guide
Figure 4-4 Removing the cover
(a) Cover
Step 3 Remove the baffle plate from the cable hole of the battery temperature sensor,
rotate the baffle plate 180 degrees, and secure it with the removed screws. Route
the battery temperature sensor into the battery pack through the cable hole, and
secure the sensor to the cable bridge with a cable tie.
Issue 02 (2022-06-30)
NO TE
If multiple battery packs are installed, install the battery temperature sensor on one battery
pack.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation
25