Husqvarna 1-10DPS75 Operator's Manual page 13

1. Loosen the 4 screws that holds the brush list.
2. Adjust the height of the brush list.
3. Tighten the 4 screws.
Abrasive
Speak to your Husqvarna dealer for the selection of
correct abrasive for your surface operation. Refer to
Approved abrasive on page 28 .
Abrasive separator
The abrasive separator makes the abrasive free
from contamination. The abrasive separator holds the
abrasive and supplies the blastwheel with abrasive.
2014 - 001 - 07.02.2023
The separator tray keeps contamination away from the
abrasive and the blastwheel.
To fill the product with abrasive
WARNING:
protective equipment during operation. Refer
Personal protective equipment on page 6 .
to
1. Make sure that the abrasive valve is closed. Refer to
To operate the abrasive valve on page 11 .
2. Unlock (A) the cover and lift (B) the handle to open
the separator.
A
Always use personal
B
13