Advertisement
KDC-W9537U/W9537UY
KDC-X9006U/X991
[FM]
Key pressed briefl y: ROM correction version is displayed.
key
(Display) R1234_ _ _
When E2PROM is not installed: ERR_ _ _ _ _
When not written in: R – – – – _ _ _
When data not matching: R∗∗∗∗_ _ _
[
]
Key pressed briefl y: Audio data initialization
key
(Display) AUD_INIT
[
]
Key pressed briefl y: Forced Power OFF data displayed.
key
Press and hold: To clear the forced power OFF
information. (Press and hold for 2 seconds while the forced
power OFF data is displayed.)
(Display) POFF_ – – – (No Forced Power OFF)
[AUD]
Key pressed briefl y: iPod authentication IC installation
key
status display.
(Display) iPod_OK_ (Installation status OK)
NG (Installation status NG)
[FNC]
Key pressed briefl y: Multi-function display.
key
Press and hold: Version & Service information display
mode ON
∗ Refer to the Table 1.
[1]~[7]
Key pressed briefl y: Version & Service information display
key
mode ON.
∗ Refer to the Table 1.
[ ]
Key pressed briefl y: CD information display mode ON.
key
∗ Refer to the Table 2.
Table 1 Version & Service information display mode
[1]
Key pressed briefl y: Version is displayed.
key
(Display) C0602WK__SYS1.23
[AM]
(Display) STYPE : xx_PAN1.11
key
(Display) PTYPE : x_ _MEM3.21
*1 STYPE indicates system µ-com destination,
↑
and PTYPE indicates panel µ-com destination,
and show real-time condition of the destination
terminal.
[2]
Key pressed briefl y: Serial No. is displayed. (8 digits)
key
(Display) SNo_××××××××
[3]
Key pressed briefl y: Power ON time is displayed.
key
(Display) PonTim_0H××_ ( 00~50 is displayed for "xx".
18
SE C ( Forced Power OFF because of
missing Security Code)
PN L ( Forced Power OFF because
of system µ-com and panel
communication error)
When less than 1 hour,
display by increment of 10
minutes.)
××××× ( 00001~10922 is displayed
for "xxxxxx".)
MAX 10922 (hours)
TEST MODE
[4]
Key pressed briefl y: CD operation time is displayed.
key
(Display) CDTim_0H××_ ( 00~50 is displayed for "xx".
[5]
Key pressed briefl y: Number of CD EJECT times is
key
displayed.
(Display) EjeCnt_×××××
[6]
Key pressed briefl y: Number of times panel is
key
opened/closed is displayed. (∗1)
(Display) PnCnt_×××××
[7]
Key pressed briefl y: Switching of all lights turned on
↓
key
(In this mode, [
switching.)
[FM]
All the white lights on (or version display) → All the
key
red lights on → All the green lights on → All the blue
lights on → All the white lights on → All the red lights
on → . . .
[ ] key
Key pressed briefl y: Invalid
Press and hold: To clear the service information that
is being displayed. (Press and hold for 2 seconds
while each service information is displayed.)
[FNC] key
Key pressed briefl y: Version & Service information
display mode OFF.
(∗1): Count 1 when the panel is fully opened and when the
disk is being loaded.
Table 2 CD information display mode
I2C communication condition and CD mechanism error log display
(Display) I2C_●●_ _ _ _ _ _ _ _ _ _ _ _
[AM]
(Display) ERR_1−▲▲,2−▲▲,3−▲▲
key
"OK" or "NG" is displayed for "●●". "– –" or the error code is
displayed for "▲▲".
↑
CD loading error log display
(Display) Load_Error_ _ _ _
(Display) _ _(1)xx_ _(2)xx
(Number of times is displayed for "xx")
CD ejection error log display
(Display) Eject_Error_ _ _
(Display) _ _(1)xx_ _(2)xx
(Display) _ _(3)xx_ _(4)xx
(Number of times is displayed for "xx")
CD time code error count data display (missing counts)
(Display) C o u n t _ L o s e
(Display) _ _CDDA_ : xx
(Display) _ _CDROM : xx
(Number of times is displayed for "xx")
When less than 1 hour,
display by increment of 10
minutes.)
××××× ( 00001~10922 is displayed
for "xxxxxx".)
MAX 10922 (hours)
MAX 65535 (times)
MAX 65535 (times)
]/ [
] keys can be used for the
MAX 99 (times)
MAX 99 (times)
MAX 99 (times)
Advertisement
