Table of Contents
Advertisement
(6) Remove the fasteners on the drain pan for horizontal installation. (2 places)
Then, remove the frame on the suction side of the unit.
(7) Remove the fixing screw of the heat exchanger and pull out it.
(8) Move the gutters and mounts on the heat exchanger to the right side. (2 places, for front
side and back side)
For the ARXU48/60 model only, move the fixing frame to the right.
* Do not switch the gutter for the front side and the back side.
Only for ARUX48/60
(9) Move the drain pan for horizontal installation to the right side of the heat exchanger.
Then reinstall the heat exchanger and fix it with screws.
(10) Attach the fastener (2 places) for the drain pan removed in step (6) to the right side of
the unit.
And reinstall the frame removed in step (6).
Then, use a sealing material (locally purchased) to close the screw holes of the fastener
removed in step (6).
Screw holes
Sealing material
(locally purchased)
Drain pan
(for horizontal installation)
En-6
Hide quick links:
Advertisement
Table of Contents
