Special Care For Oled; Monitor 20 - Philips 27E1N8900 User Manual

6. Special Care for OLED

Monitor
Displaying a static image over the long
term can lead to image sticking on this
monitor. It is recommended to change
the screen image, or turn the monitor
off and turn back on, every 4 hours.
Following the characteristic of OLED
display, it is strongly recommended to
follow these instructions to care for
your OLED monitor for reduction of
image sticking. Failure to follow these
instructions can cause damage to the
monitor, which will void the warranty.
It is strongly recommended to follow
these instructions to care for your OLED
monitor:
• Do not display the same image for
long periods of time. Use a screen
saver to prevent sticking.
• Use full screen mode to prevent
residual menu, browser or other
window border images.
• Do not apply stickers or labels to the
OLED panel which may cause image
sticking.
This Philips OLED monitor is equipped
with the following sticking reduction
features.
It is recommended to always leave these
features turned on to avoid image
sticking.
• Pixel shift (Pixel Orbiting)
Pixel shift moves the image a couple
of pixels at regular intervals to avoid
potential sticking. This is not noticeable
in normal circumstances. Default setting
is On.
• Screen Saver
When a static image is detected for a
long period, the screen saver function
will dim the screen to protect the panel
from sticking. If you change the screen,
such as moving your mouse quickly
across the screen, the monitor will return
to the previous working status. Default
setting is On, and it is recommended
that you also set your device to use a
screen saver.
• Automatic screen brightness control
(Smart Brightness Limiter)
When displaying a large bright window,
the Smart Brightness Limiter will
automatically activate to help protect
your OLED screen from potential
sticking, by reducing brightness slightly
once the window is inactive.
The LED power indicator on the front
bezel will change to amber to show that
Smart Brightness Limiter is active. The
brightness of the LED power indicator
can be changed in the OSD menu.
Default setting is On.
20