Start-Up; Mains Voltage Activation; State Of The New Device At The Point Of Delivery; The Device Has Already Been In Use In A Different Network - ABB Busch-AudioWorld iNet 8216 U-500 Operating Instructions Manual

Operating Instructions
Busch-AudioWorld
Pos: 14 /#Neustruktur#/Leermodule/-----------------------------------------Erstinbetriebnahme----------------------------------------- @ 25\mod_1340800537629_15.docx @ 220369 @ @ 1
Pos: 15 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Erstinbetriebnahme @ 17\mod_1299234649340_15.docx @ 100978 @ 1 @ 1
2

Start-up

Pos: 16 /#Neustruktur#/Online-Dokumentation (+KNX)/Erstinbetriebnahme/AudioVideo/Erstinbetriebnahme - 8216 @ 25\mod_1339768092362_15.docx @ 217784 @ 23322 @ 1
2.1

Mains voltage activation

2.1.1

State of the new device at the point of delivery

Access Point
BJE-Radio-xxxx
PROG
Fig. 1: State of the device at the point of delivery
1. Switch on the mains power supply. If the state of the device is at the point of delivery, the display shows a
date, the latest software version and the serial number. The device will then switch itself off.
2. Reactivate the device. The display will now show that it is an access point. It will also show the name of the
device and the WLAN receiving status.
2.1.2

The device has already been in use in a different network

1. If the device has been in use in a different network, reset it to the factory settings.
2. Press the entire rocker switch for approximately 5 seconds.
2.2

Connect the radio with the WLAN network

Fig. 2: Connecting the device with the WLAN network
1. Press the "ON/OFF" button.
2. Search for the WLAN networks with a WLAN-capable device (dependent on the operating system).
3. Check whether the WLAN network "BJE-Radio-xxxx" is displayed.
4. Establish a connection with the WLAN network "BJE-Radio-xxxx".
Operating Instructions | 1473-1-8129
®
PROG
Start-up
— 4 —