Connecting The Radio With The Router (Access Point Mode) - ABB Busch-AudioWorld iNet 8216 U-500 Operating Instructions Manual

Operating Instructions
Busch-AudioWorld
2.3

Connecting the radio with the router (access point mode)

Fig. 3: Connecting the device with the router
5. Enter the default IP address of the radio in the browser (http://192.168.111.1).
6. Select the desired language in "Language setting".
7. Enter the network name (SSID) and the password.
8. Then select "DHCP" (recommended) or "User-defined". Change the name of the device if required and click
on "Save".
9. The radio starts again. The time (CET) is displayed after 2 minutes. The reference >"Access Point mode
deactivated. Radio mode is now active!"< is displayed.
10. Switch the radio on.
11. Wait for approximately 2 minutes, until the date and time are displayed!
The radio is now ready for operation.
12. Press the "ON/OFF" button to listen to the first pre-set radio station.
Pos: 17 /#Neustruktur#/Online-Dokumentation (+KNX)/Benutzerinformationen (--> Für alle Dokumente <--)/Hinweise/Hinweis - Möglichkeiten der Einrichtung @ 25\mod_1340702043039_15.docx @ 220124 @ @ 1
To set up your device you have two options:
1. To set up the device manually, see from page 8.
2. To set up the device via WLAN, see page 30.
Pos: 18 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1
Operating Instructions | 1473-1-8129
®
192.168.111.1
PROG
Start-up
— 5 —