Table of Contents
Advertisement
Operating Instructions
Busch-AudioWorld
Fig. 27: Connecting the cables
2. Connect the cables to the flush-mounted-insert.
–
For the connection assignment see chapter "Electrical connection" on page 43.
Fig. 28: Mounting the flush-mounted-insert.
3. Mount the flush-mounted-insert.
Fig. 29: Mounting the flush-mounted-insert.
4. Plug the attachment together with the frame onto the flush-mounted insert.
–
Make sure that the plug-in connection on the rear side does not get jammed.
–
If mounting is difficult, check whether a burr has formed at the lock-in opening of the flush-mounted insert
and remove it.
The device is now mounted.
Operating Instructions | 1473-1-8129
®
Installation and electrical
connection
— 42 —
Advertisement
Table of Contents
