Philips S99 Series Manual page 14

14
English
Electromagnetic fields (EMF)
-
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
General
-
This shaver is waterproof (Fig. 3). It is suitable for use in the bath
or shower and for cleaning under the tap. For safety reasons, the
shaver can therefore only be used without cord.
-
The appliance is suitable for mains voltages ranging from 100 to
240 volts.
-
The supply unit transforms 100-240 volts to a safe low voltage of
less than 24 volts.
The display
Note: Before you use the shaver for the first time, remove the
protective foil from the display.
Personal comfort settings
The appliance has a feature that allows you to personalise your
settings. You can choose between three settings depending on your
personal shaving needs: comfort, dynamic or efficiency (Fig. 5). When
you press the - or + button, the segment of the personal comfort
settings bar that lights up shows the currently selected setting.
You can press the + or - button to select a different setting (Fig. 5).
Charging
When the shaver is charging, the battery charge percentage and the
battery symbol flash white (Fig. 6).
The battery charge is indicated by the battery charge percentage
shown on the display.
Quick charge: When the battery symbol starts to flash quickly,
the shaver contains enough charge for one shave.
Battery fully charged
When the battery is fully charged, the battery charge percentage
lights up white continuously (Fig. 7).