Ethernet Connector; Usb Connector - Mitsubishi Electric FR-A802-E Instruction Manual

2.7.2

Ethernet connector

 Ethernet communication specifications
Document
Category
Data transmission speed
Transmission method
Maximum segment length
Number of cascade connection
stages
Interface
Number of interfaces available
IP version
 Connection cable
Use Ethernet cables compliant with the following standards.
Communication
speed
100 Mbps Category 5 or higher, (shielded / STP) straight cable
Category 3 or higher, (shielded / STP) straight cable
10 Mbps
Category 3 or higher, (UTP) straight cable
 Hub
Use a hub that supports a desired transmission speed of the Ethernet.
2.7.3

USB connector

Place a flathead screwdriver,
etc. in a slot and push up the
cover to open.
 USB host communication
Interface
Transmission speed
Wiring length
Connector
Format
Compatible
Capacity
USB memory
Encryption function
Description
100BASE-TX/10BASE-T
100 Mbps (100BASE-TX) / 10 Mbps (10BASE-T)
Baseband
100 m between the hub and the inverter
Up to 2 (100BASE-TX) / up to 4 (10BASE-T)
RJ-45
1
IPv4
Cable
Conforms to USB 1.1
12 Mbps
Maximum 5 m
USB A connector (receptacle)
FAT32
1 GB or more (used in the recorder mode of the trace function)
Not available
Connector
100BASE-TX
RJ-45 connector
10BASE-T
USB host
(A connector)
USB memory device
Communication status
indicator (LED)
USB device
(Mini B connector)
Personal computer (FR Configurator2)
2. INSTALLATION AND WIRING
2.7 Communication connectors and terminals
1
2
3
4
5
Type
6
7
8
9
10
61