Table of Contents
Advertisement
SuperWorkstation 5039D-I User's Manual
Wait For 'F1' If Error
Use this feature to force the system to wait until the 'F1' key is pressed if an error occurs.
The options are Disabled and Enabled.
INT19 (Interrupt 19) Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function. When this item is
set to Immediate, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup
immediately and allow the drives that are attached to these host adaptors to function as
bootable disks. If this item is set to Postponed, the ROM BIOS of the host adaptors will not
capture Interrupt 19 immediately and allow the drives attached to these adaptors to function
as bootable devices at bootup. The options are Immediate and Postponed.
Re-try Boot
If this item is enabled, the BIOS will automatically reboot the system from a specified boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI
Power Configuration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate NMI based on
jumper settings when it is expired for more than 5 minutes. The options are Enabled and
Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4_Seconds_Override for the user to power off the system after pressing and holding the power
button for 4 seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are 4 Seconds Override and Instant Off.
Restore on AC Power Loss
Use this feature to set the power state after a
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a
power loss. Select Last State to allow the system
to resume its last power state before a power loss. The options are Power-On, Stay-
Off, and Last State.
57
Boot.
power outage. Select Stay-Off for
CPU Configuration
The following CPU information will display:
•
CPU Signature
•
Microcode Patch
•
Max CPU Speed
•
Min CPU Speed
•
CPU Speed
•
Processor Cores
•
Hyper Threading Technology
•
Intel VT-x Technology
•
Intel SMX Technology
•
64-bit
•
EIST Technology
•
CPU C3 State
•
CPU C6 State
•
CPU C7 State
•
L1 Data Cache
•
L1 Code Cache
•
L2 Cache
•
L3 Cache
•
L4 Cache
Hyper-threading (Available when supported by the CPU)
Select Enabled to support Intel Hyper-threading Technology to enhance CPU performance.
The options are Enabled and Disabled.
58
Chapter 6: BIOS
Advertisement
Table of Contents
